Retrotec 6212F Lower Leak

 

The high power fans will test their ability to open and then accurately measure the entire relief vent pathway to ensure the peak pressure specifications are not exceeded.

Test for hold times in flooded volumes up to 102,000 cu ft (2000 m3) for Inert agents and 140,000 cu ft (4000 m3) for halocarbon chemical agents.

Testing pressure relief vents will require more power however. This system will test the venting for a volume up to a maximum of 24,000 cu ft (660 m3) for Inert agents although vents up to 16 sq ft (1.6 m2) can be measured individually.

  • Technical specifications:

    Model 6000 Fan
      Flow Into: CFM Litres/sec M3/h
    Max Flow, per fan (60 Hz) Free Air 8,100 3,823 13,762
      50 Pa 7,700 3,634 13,082
    Reduces values by 15% for 50Hz fan 75 Pa 7,400 3,492 12,573
    Minimum Flow: 50 Pa 9 4 15
    on Range B29
    Dimensions: 26" × 25.5" × 9.5" (66 x 65 x 24 cm)
    Weight: 36.3 lb (16.5 kg) or 38 lb (17.2 kg) with Ring A & Plated B8 installed
    Flow Accuracy: +/-5%
    Power: 120V@60hz/22.0A or 240V@50hz/10.9A or 110V@50Hz/22.0A
    Recommended Fan Calibration Interval: 5 years
    Digital Gauge Model: DM32 WiFi
       
    Door Panel and Frame Model: PN201
    Type of Panel:   Hard Panel  - Single 1000/3000/5000/6000 Fan

    * The max flow of the fan will vary depending on the following factors: Voltage, frequency, barometric pressure, back pressure, blade pitch, air temperature, bearing tightness, inlet air turbulence

    * 5000/6000 series blower doors DO NOT work with the DM-2 digital gauge

     

Complete Systems

CONTACT US

Inquiries

For any inquiries, questions or commendations, please call: +971 45517140 or fill out the following form

Contact Us

Head Office

Office 2807, JBC1
Cluster G, Jumeirah Lakes Towers,
Dubai, UAE
Phone +971 (0) 45517140
DMCC registration nr. DMCC37325
info@buildingdoctor.ae